Saturday, March 23rd 2019, 4:23am UTC+1

You are not logged in.

  • Login
  • Register

Search results

Search results 1-20 of 104.

Friday, March 1st 2019, 10:34pm

Author: peppardo

RR BLS Re 4/4 192

in 2019 we expect to see at least a printed circuit worthy of the times ... these cabling are of a poor level and even the equipment of the 21-pole interface, when the Plux exists, leaves really disappointed ...

Friday, March 1st 2019, 9:49pm

Author: peppardo

RR BLS Re 4/4 192

Hello Rufer, I've tried to explain me in your language...it would seem that I did not succeed!! Following some other pictures of this locmotive: scandalous

Friday, March 1st 2019, 5:56pm

Author: peppardo

RR BLS Re 4/4 192

Grüße an alle heute angekommen ... ausgezeichnete verpackung mit schützendem schwamm und acetat der lokomotive die anweisungen sind sehr schief und hier drücke ich nicht aus ... Die Baustelle ist im Allgemeinen gut gemacht. Abgesehen von dem Stromabnehmer, der nicht mit dem Dach verschraubt ist, muss beim Anheben sehr vorsichtig vorgegangen werden, da die Gefahr besteht, dass er vom Sitz abgehängt wird, wo er durch 3 Fuß eingeführt wird ... na ja ... Der zusätzliche Umschlag enthält das Modellie...

Sunday, January 20th 2019, 10:30pm

Author: peppardo

SUSI on LP 4.0 Plux22

Hi to all. I would like to know, if, with a Plux22 decoder, as the NMRA standard, can I use a MODULE with SUSI interface (cable interface not plug) Thanks to all. Regards. Hallo an alle. Ich würde gerne wissen, ob ich mit einem Plux22-Decoder als NMRA-Standard ein MODUL mit SUSI-Schnittstelle verwenden kann (Kabelschnittstelle nicht Stecker). Dank an alle. Grüße.

Monday, January 14th 2019, 7:47pm

Author: peppardo

Roco krokodil mit sound esu 54471

this is how I had solve, with my crocodile Roco 63524: the speaker is a 15x11 hm (chinese production) with sound chamber, as the Zimo or ESU products So hatte ich mit meinem Krokodil Roco 63524 gelöst: Der Lautsprecher ist ein 15x11 8 ohm (chinesische Produktion) mit Klangkammer, wie die Produkte von Zimo oder ESU

Sunday, May 6th 2018, 11:21pm

Author: peppardo

Neue Roco Ae 6/8 205 Nr 78644 - Frage nach Schleifer und Decoder

chinesische Lösungen von Aliexpress und Gehäuse von D&H oder Peter Staerz http://www.firma-staerz.de/index.php?sub=produkt&id=113

Sunday, March 4th 2018, 12:07am

Author: peppardo

Liliput E3/3 digitization

Guten Abend an alle, Ich entschuldige mich, aber ich habe den Edit-Button nicht gefunden, sonst hätte ich nur alles ins Deutsche übersetzt. Ich möchte mit Ihnen die neuesten Digitalisierungsarbeiten von 2 Liliput E3 / 3 Lokomotiven teilen. Nachdem ich das Getriebe und den Motor demontiert und überarbeitet habe, um das Getriebe analog zu machen, habe ich zuerst die Frontlampe des Funktionsdrahts (gelb) vom Decoder, für das positive I ausgerüstet benutzte die Masse des Rahmens. Nun musste der Rahm...

Saturday, March 3rd 2018, 11:18pm

Author: peppardo

Liliput E3/3 digitization

bald legte ich die Übersetzung ins Deutsche Mfg

Friday, March 2nd 2018, 12:27am

Author: peppardo

Liliput E3/3 digitization

Good evening to everyone, I would like to share with you the latest digitization work of 2 Liliput E3 / 3 locomotives. After having dismantled and provided for a revision of all the linkage and the engine, to make the gear smooth in analog, the first thing I did was to equip the front lamp of the function wire (yellow) from the decoder, for the positive I used the mass of the frame. Now the frame had to be milled to make room for the decoder, a Loksound micro 4.0 of ESU ... the contacts of the m...

Wednesday, January 24th 2018, 8:45am

Author: peppardo

LS Bm 4/4

hi to all, following my question directly to LSModels, this is the answer of them: "Bonsoir Mr. Giuseppe Pour cette locomotive vous devez utiliser un décodeur avec programmation spécifique LS Models, ceci veut dire que vous devez commander ce décodeur via votre détaillant en précisant que c’ est pour la locomotive BM 44 LS Models. Je reste a votre disposition pour d’éventuelle questions. Cordialement LS Models Orhan" So, everything that has been said about it, is not worth anything ... the probl...

Sunday, January 14th 2018, 11:22pm

Author: peppardo

LS Bm 4/4

Hi Modellbahner, I'm following the logical iter to find a solution...I don't love to waste my time and the time of other people, you know? Some post beyond, you suggest me to buy a 4.1 decoder to close the question... And I followed your suggestion, but it seems like no way to find out. Now, I thank you once time for your offer...I will send you a private message to find an agreement about the buying of a decoder...thanks to all....

Sunday, January 14th 2018, 9:03pm

Author: peppardo

LS Bm 4/4

Hi Nico, thank you for your suggestion... I wrote to Lsmodels, asking about a search of some solution, and they answer me that when them come back from China we try to find a solution... Regarding the v4. 1, I also wrote to a big dealer on Germany, where I bought the locomotive, and the answer was that they don't know about the new version and I have to wait until the ending of the Nuremberger fair, 'cause it would be possible this new version will be a novelty presented this year... You know? T...

Sunday, January 14th 2018, 6:33pm

Author: peppardo

LS Bm 4/4

after much ruminating on the thing, perhaps I have come to a conclusion: the outputs used for the cab and the red lights are logic outputs, so it can be deduced that the transistor section does not activate the 2 functions. now with the ESU 51698 adapter, activation is possible ... what do you think? someone used this adapter and can you tell me if it enters the hood of the locomotive? nachdem ich viel über das Ding nachgedacht habe, bin ich vielleicht zu einem Schluss gekommen: die Lichter für ...

Wednesday, January 10th 2018, 10:51pm

Author: peppardo

LS Bm 4/4

Hallo, Modellbahner, but if I buy this decoder V4.1, from a internet shop, do you think I can know in advance if it will be the right decoder? I have to find a patient seller, don't you think? where to have a lot of luck in finding a seller to give me this important information ...

Wednesday, January 10th 2018, 10:22pm

Author: peppardo

LS Bm 4/4

[quote='hal6ke',index.php?page=Thread&postID=136735#post136735 Muss jetzt noch einen aktuellen Decoder einkaufen, mit einem Lopi 4.0 gehts ja nicht.[/quote] viel Glück

Sunday, January 7th 2018, 9:17pm

Author: peppardo

LS Bm 4/4

ok thanks so much Modellbahner...

Sunday, January 7th 2018, 7:44pm

Author: peppardo

LS Bm 4/4

what would be the article number to be sure it's a new V4.0 or a V4.1? and maybe loksound? (sorry but with German I'm going crazy)

Sunday, January 7th 2018, 2:50pm

Author: peppardo

LS Bm 4/4

dear Modellbahner, I do not doubt about your professional skills and competence in this area ... I wrote to the seller that he offered to call LSModels, even though I have my strong doubts that LS can resolve the issue. in the mask of the lokprogrammer I see a date: Pdate 13/03/2015 ... maybe that date is that of production of the lot decoders? and by chance, that other date (Adate 03/13/2017) what can it match? maybe at the firmware update date? Now, I wait for the seller to answer me and in ca...

Sunday, January 7th 2018, 12:31pm

Author: peppardo

LS Bm 4/4

according to my humble opinion, it is not the decoder that needs to be updated, but it would be right for LS to remedy the various errors, including that of allowing their products to be sold, and I fell for the second time, that despite the cost, have these problems ... what should I say I'm unlucky? besides, the after-sales service does not seem to me more serious, have you ever tried to write to LS, as long as you can understand where to write? not good, we fans do the somersaults to buy our ...

Sunday, January 7th 2018, 12:04pm

Author: peppardo

LS Bm 4/4

thanks for the news Modellbahner... for your information, I also tried to mount a Zimo decoder, but the result was the same ... I came to my conclusion about the marketing of this model, after having troubled to free the screw under the chimney, after having troubled to free the screws under the rear carriage and finally after discovering, for the second time, I repeat for the second time, that the loco does not behave as manual and the manual was not written by us, but by LSModels ... the ESU d...